|Gloabal After Service::||Supply||Purity::||99.9995%|
|Usage::||Pharmaceutical Filling||Material::||Carbon,stainless Steel|
|After Service::||Yes||Air Compressor::||Equip|
psa nitrogen gas generator,
psa n2 generator
PSA nitrogen generator for Pharmaceutical Filling usage:
4).Low compressed air consumption
Under certain temperature,the residual oxygen in the low-purity nitrogen and the carbon provided by carbon catalytic generate CO2 after nitridation of C+O2=CO2.After removing the CO2 by PSA technique and further denitrification ,high-purity nitrogen is produced.
There is no H2 in it and it is suitable for use in the occasions which have strict requirement for H2 and
High-efficiency and energy-saving technique makes the energy consumption of the system reduce greatly.
The deaerator adopts two-tower structure and adding and replacing of carbon catalytic agent can
be done under non-stopping state.
Automatic venting device with national patented technology ensure s the quality of the produced nitrogen.
The key parts in the system adopt the famous brand,which is the effective guarantee of the equipment quality.
It ha s functions of diagnosis,alarming and automatic troubleshooting for several failures.
Nitrogen Output:10~5000Nm³ / h
Nitrogen Purity : ≥ 99.9995%
Oxygen Content: ≤ 5 ppm
Carbon Dioxide Content: ≤ 1 ppm
Dew Point: ≤ -70 ºC
First please refer for the principle of PSA nitrogen generator, it means PSA nitrogen generator can take most of the requirement of gas nitrogen.
In the petroleum and natural gas area, the nitrogen's purity, pressure and flow can be very different through the different application, but our system can reach all the requirement.
Normally PSA nitrogen generator's application is that delivering and storing the petroleumm and natural gas, to be driving gas, to be protection gas of control board, maitain the oil well's pressure, keep and improve the oil productivity and etc.
The parameter of PSA nitrogen generator:
·Purity: ≥95%-99.9995%(Means without oil)
·Dewpoint: -45oC- -60oC
·Pressure: 1-6bar (The max pressure can be 300 barg)
Advisory Services: Solve your problems one to one, and provide the most suitable and energy saving plan.
Technical Support: Provide you the security drawings of the whole machine and technological equipment flow chart; send our technician on mission to help you if needed.
Technical Support: Provide free installation guide and operation training, and the after-sale technical documents to the customers.
Quality Assurance: Three guarantees are valid in one year since the machine leave the factory. We provide maintenance service during all the machine’s life.
Customer Service: We will make periodical return visit in order to know the service condition of the machine.
Jiangsu Tongyue Gas System Co.,ltd. established in 2011,specializes in the production of nitrogen generators, air compressors, oxygen and other gas processing equipment. The products are widely used in Oil and gas industry ,medicine, chemical industry, chemical fiber, metallurgy heat treatment, electronics, steel, coal, and other industries.
Our company has a number of patented technologies and intellectual property rights. Now we have 8 engineers,60 employees. We insists on using high-quality imported parts, and have established and improved production processes, quality control system, and after-sales service evaluation system, to provide best service to each customer.
Our businesses cover throughout the country, and we also exported our products to Southeast Asia, Europe ,Mid east and other overseas markets.
The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
Nitrogen flow: 0-2,000Nm3/h O2: ≤1ppm Dew point: ≤-70℃ Nitrogen purity: 99.99%-99.999%
1. Good stability, oxygen content can be controlled to be less than 5ppm at any time.
2. High purity, capability of keeping long-term stability when nitrogen purity is 99.9995%.
3. High reliability, manufactured according to the international standard.
|No.||Description||Quantity||Main technical parameter|
|Screw air compressor||
Rated air flow :23.2Nm/min