Pressure Swing Adsorption Technology Modular Nitrogen Generator 99.999% Purity

Basic Information
Place of Origin: China
Brand Name: True Gas
Certification: CE ,FCC,TUV
Model Number: TYN-MK
Minimum Order Quantity: 1 set
Price: as negotiable
Packaging Details: Woodencase packing
Delivery Time: 30 working days
Payment Terms: T/T
Supply Ability: 200 sets per month
Applicable: Electrical Outlet Connection Conditon: New
Warranty:: 1 Year Type:: Modular Type
Color:: As Required
High Light:

pressure swing adsorption modular nitrogen generator

,

99.999% purity modular nitrogen generator

,

pressure swing adsorption nitrogen gas generator

New technology 99.999% high purity PSA Modular Nitrogen Generator

 

I, Nitrogen generator system design
Pressure Swing Adsorption Technology Modular Nitrogen Generator 99.999% Purity 0

1. Compressed air system

Air compressor supply the raw material air for the nitrogen generator. The nitrogen making system need high quality,stable pressure and enough air consumption.Air compressor should use the reliable, maintenance easily,low noise,screw air compressor.
2. Pressure Swing Adsorption Nitrogen making system
Pressure swing adsorption (PSA) is an advanced gas separate technique,it is widely used in gas supply field in the world.
2 .1 Adsorbing material
Adsorbing material is the center part of PSA nitrogen generator,Normally use the the Carbon Molecular Sieve,it can adsorb the oxygen,CO2,water in the air,but can’t adsorb the nitrogen..
2.2 PSA principal
Because O2 and N2 these two gas molecule have diffusion rate difference on the molecule sieve surface,O2 smaller diameter can diffuse faster,most of them inlet micropore of CMS,the large diameter N2 diffuse slowly,less of them can inlet ,use this adsorption difference come true O2 and N2 separate.
2.3 PSA N2 making processing
(1) Inlet air:The air compressor press the air into transporting pipe,then use the compressed air clarification system to remove the water,oil,dust and so on,reach to air buffer tank,then pass through air buffer tank into two adsorption tower.
(2) Adsorption: When air inlet adsorption tower,during the pressure function,O2 and CO2 be adsorbed quickly.Formed N2 near the outlet position.
(3) Air outlet :When the adsorption process working in the best status(Adsorption N2:O2 is the smallest),open the outlet valve,transport the N2 into N2 buffer tank.
(4) Average pressure:After finished exhaust,rest some N2 in the tower,so let it into another tower adsorb again with new air.This process is finished when the pressure of two tower is the same,so called average pressure.
(5) Exhaust :After average pressure finished,need to releasing the air which adsorb by CMS to be ready for next adsorption,the programme will open the air releasing valve automatically,let the pressure in the tower back to the original status,meanwhile release the O2,CO2,so than the CMS can adsorb new air again.
(6) These two tower exchange work can got N2 purity 99.999%

 

Modular type PSA nitrogen generator

Model Specification
G-5MZ
N2 capacity Nm3/Hr 5
N2 purity % 99.999%
N2 outlet pressure Mpa 0.1~0.6
Air inlet pressure MPa 0.7~0.8
Air inlet temperature ≤38
Dew point ≤-40
Working condition
Air compressor flow m³/Min 0.5
Max working pressure MPa 0.8
Ambient temperature 40
N2 outlet dia DN 15
Air inlet dia DN 15
Working cycle S 40-55
Regeneration mode   Pressure swing analysis and alternate purging
Voltage:   220V/50Hz
Pneumatic valve mm DN15*5
Muffler mm customizing
Adsorbent CMS260 1 batch
Controller PLC Siemens

 

Pressure Swing Adsorption Technology Modular Nitrogen Generator 99.999% Purity 1

Contact Details
Ms.Vera

Phone Number : +8613961615106

WhatsApp : +8613961615106